JIS A1425:1985 pdfダウンロード。Test Method of Thermal Performance for Solar Collectors Scope This Japanese Industrial Standard specifies the testing method forthethermal performance of non-tracking solar heat collectors of the flat platetype, vacuum glass tube type, and other types which collect solar heat inthe form of sensible heat by compulsorily circulating a liquid as the heatcollecting medium, hereinafter referred to as the “solar collectors”. This standard also covers solar collectors having reflectors， thosehaving light collectors, and those having an operating medium for con-ducting heat from the absorber to the heat collecting medium; such as heatpipe type solar collectors, but does not apply...

JIS A1426:1985 pdfダウンロード。Test Method of Thermal Performance for Solar Storage Tanks Scope This Japanese Industrial Standard specifies the testing methods for thethermal performance of solar heat storage tanks of the direct heat storagetype, indirect heat storage type, and other types for solar systems whichuse liquids as the heat storing medium and store thermal energy as sensibleheat, hereinafter referred to as the “heat storage tanks”, However, thisstandard does not apply to heat storage tanks which use heat collectingmediums or heat storing mediums utilizing latent heat. The heat storagetanks referred to here mean heat storage tanks having heat storage tankcapacity of not...

JIS A1517:1984 pdfダウンロード。Test Method of Water Tightness for Windows and Doors 1.Scope This Japanese Industrial Standard specifies the test method of watertightness under pulsating pressure _utilizing the pressure chamber on opening components，hereinafter referred to as the “Windows and Doors”,specifled as ‘Opening Components Class 1 in JIS A 0005 among the testsspecified in JIS A 1513. Remark:The units and numerical values given in i } in this standard are in accordance with the International System of Units (SD,and are appended for reference. 2.Definitions For the purpose of this standard，the following definitions apply.(1) pressure differenceDifference between the external pressure andthe internal pressure...

JIS A4709:1984 pdfダウンロード。JAPANESE lNDUSTRIALSTANDARD Screens for Aluminium Sliding Windows 1.Scope This Japanese Industrial Standard specifies the aluminium alloy screens,hereinafter referred to as the “screens”, to be attached to aluminium alloy window sashes which are corresponding to sliding in classification according toopening and closing methods，hereinafter referred to as the “sashes” , mainlyamong the aluminium alloy sashes specified in JIs A 4706. Remark:The units and numerical values given in { } in this standard are in accordance with the International system of Units (SI),and are appended for reference. 2.Types and Symbols The types and symbols of the screens shall be in accordance...

JIS A4713:1984 pdfダウンロード。AMADO for Windows and Doors 1.Scope This Japanese Industrial Standard specifies AMADO for windows and doors used mainly in dwelling houses，hereinafter referred to as the “amado”. Remarks 1. The amado referred to herein is a general term including amado bodies，an amado frame，and an amado box( l). 2.This standard specifies the sliding amados，and folding and revolving amados are not included. 3.The units and numerical values .given in { ] in this Standard are in accordance with the International Systemof Units ,and are appended for informative reference. Note ( ) The amado box referred to herein means the portion whereinthe...

JIS A4714:1985 pdfダウンロード。PVC Windows for Interior Installed 1.scope This Japanese Industrial Standard specifies PvC windows for interiorinstalled used for multiple windows at an opening in the outer wall of a building,hereinafter referred to as the “windows for interior installed”. Note (‘) The PvC windows for interior installed shall be the windows for interior installed in the multiple windows using a glass，except forthose for exterior installed.Their main components shall be of extruded materials according to JIS K 6740，and steel and aluminiumalloy materials shall be used together as reinforcement，as required. Remark: The units and numerical values given in { } in this...

JIS A8604:1985 pdfダウンロード。Submersible Pumps for Construction 1.Scope This Japanese Industrial Standard specifies a temporary and portablesubmersible pump,hereinafter referred to as the “pump”,used for civil-engineering works，architectural works and other construction works，whichis of single suction，single stage,centrifugal type and has nominal diameter (“)of pump of 32 to 250 mm and is coupled directly with a submersible 3-phasesinduction motor with 2 poles,4 poles or 6 poles,or a submersible single phaseinduction motor with 2 poles or 4 poles and rated frequency of 50 Hz or 60 Hz, Note (-) The nominal diameter of pump shail be indicated by a nominal diameter of hose coupling to...

JIS B0137:1985 pdfダウンロード。Glossary of Terms for copying Machines 1. Scope This Japanese Industrial Standard specifies the glossary of terms forgenerally used diazo copying machines，direct method electrostatic processcopying machines，indirect method electrostatic process copying machines,etc. Remark: The name of each business machine shall be in accordance with JIS B 0117. 2.Classification The terms shall be classified as follows: (1)General name (2)Parts (3Consumption goods 3.Terms，Readings and Definitions The terms，readings and definitions shall be as follows. Furthermore,the corresponding English is shown for informativereference.

JIS B4120:1985 pdfダウンロード。lndexable Inserts for Cutting Tools-Designation 1.Scope This Japanese Industrial Standard specifies a code of symbolization for the designation of indexable throw-away inserts in materials suchas cemented carbide，cermet and ceramics for cutting tools，hereinafterreferred to as the “inserts”. 2.Definition For the purpose of this standard , the following definitionsapply : basic inscribed circle ( d )An inscribed circle taken as thebasis to define the height of corner and the size of insertsand having the diameter equal to the basic size. (2)normal clearance angle ( en ) The normal clearance angle shall be as follows. ( 3)height of corner (m) The...

JIS B4121:1985 pdfダウンロード。Indexable Inserts without Fixing Hole，with 0 Normal Clearance 1.Scope This Japanese Industrial Standard specifies indexable cemented carbideinserts without fixing hole，without chip breaker，and with 0° normal clearance angle to be used for indexable insert holders and the like,hereinafter referred to as the “tip”. Remark: It is preferable to apply this standard，with due changes having been made，to indexable inserts made of cermetand ceramics. 2.Definitions For the purposes of this standard，the following definitions apply : (1)basice inscribed circle ( a )An inscribed circle taken as the basis to define the height of corners and the size of inserts，and havingthe diameter equal...